|
Water Distiller
Features
Only water distiller on the
market with faucets that are ALL STAINLESS STEEL. Other distillers
use plastic housings, with rubber gaskets and plastic nuts in the inside
of the tank to hold it on. Ours does not !
Larger Drain than most other water
distillers. Although some distillers claim they
have such and such size valve, most taper down into a
3/8" tube restricting flow. Our distiller is a
FULL 1/2" drain tube, allowing easier
draining.
These are the devices that detect the water level
in the boiling chamber and holding tank. Detection is
done via conductance, eliminating ALL mechanical
switches, moving parts, and seals other water distillers
use for detecting water level. This eliminates
many of the failure parts in most other water
distillers, and eliminates PLASTIC float sitting in your
water.
This is the heart of all auto fill American Water
Distillers. This circuit eliminates the necessity
of manual sterilization. Our water distillers
sterilize themselves on a regular basis, eliminated the
need to manually sterilize the unit, and also
sterilizing it more often, keeping your distiller germ
free!
Stainless Steel coil, with Volatile Escape Vent,
and electronic circuit board. Also, our fan is
protected with a shroud, eliminating the possibility of
the coil hitting the fan blade during
shipping.
Water Distiller Solenoid Valve,
stainless steel construction. Also notice on the right, that is
where the water line is connected to an outline water source. The
connector is made out of stainless steel, not plastic. Our water
distillers are the only ones were aware of constructed with such high
quality material.
Only Water Distiller on the
market with a Stainless Steel Heating Element! Other distiller
elements are similiar to what is used in an oven, and crack/break easy
during cleaning.
And of course, in the rare
instance something breaks, we have parts, IN STOCK!
AQUALINK PURIFIERS
#
Capacity:16 GPD
= 61 LPD
· 6.0 Gallon Cold Water holding tank
· 1 Gallon Distilled Hot water tank.
· ONLY Water Distiller on the market
with Double
Distillation Process !
· TOTAL holding capacity, 7.0
GALLONS!
· Refillable Post filter! No Plastic! No
proprietary
high filter fee!
 WATER DISTILLER
CAPACITY:15 GPD = 57 LPD
6.0 Gallon Cold Water
holding tank
All Stainless Steel
Faucet (No Plastic)
Single Distillation
Refillable Stainless
Steel Post Filter, No Plastic!
Water Distiller
· Double Distillation * Distills 2X
#
Capacity : 23 GPD = 88 LPD
· 11.0 Gallon holding tank
· Energy Efficient Design
· Refillable Post Filter! No Plastic of paper filter!
|
Electrical: 220V
,1200 Watt (Other voltages available)
Coconut Charcoal Carbon
pre Filter good for 1,900 Gallons
Purity: 0
PPM on TDS > 99.9 Percent
Purity
.
|
·
Super Large Carbon
Filter removes VOC's prior to distillation.
Eliminating possibility of collected contaminants being
released from filter directly into distilled water at
saturation point of filter. Last 1 1/2 years if
you make 5 gallons a
day.
· Volatile chemicals that boil at a temperature
lower than water (chlorine is a good example), unless removed prior to
distillation, will either go back into the distilled water or, more
commonly, be vaporized into the air of your
home. Breathing them is
as bad as drinking them. The best policy is to filter
the water through carbon before distilling it. Our water
distiller removes them PRIOR to distillation! No
dangerous VOC's will be released into your house to
breath!
· Made out of
304 Stainless Steel. No Plastic faucet, no plastic
fittings, no plastic float parts, no plastic lid knobs
!
· More parts on out water distiller are made
out of stainless steel than any other water distiller on the
market.
· GAC system also reduces hard water deposits,
meaning less cleaning.
· Auto Sterilization, keeps water distiller
germ free.
· V shaped boiling chamber.
· NO PLASTIC or rubber gaskets that touch the
water in the boiling chamber.
· No floats or mechanical devices to get
knocked around or out of alignment during shipment.
· 1 Piece unit, no assembly or wiring
necessary. Much easier and quicker to hook up compared to other water
distillers. Most other water distillers require the top to be hooked
up to the bottom, and screws/nuts/rubber washers must be held tightened up
from the INSIDE of the holding tank of the water distiller, which is not
easy. And wiring harnesses must be attached. Our drain valves are
already installed on the water distiller. All the customer has to do
with our water distillers is screw the faucet on the front by hand, no
tools needed, and attach an incoming water line to the distiller. No
other automatic water distiller is this easy to hook up.
· Water distiller has a completely removable
boiling chamber lid, which provides the easiest access in the industry to
the stainless steel boiling chamber itself.
· All American Water Distiller functions are
controlled by modern solid-state circuitry. All American Water
Distiller units have no mechanical floats, float seals or micros
witches to leak, fail, leach, or require replacement. And the plug-in
connectors make servicing the water distiller a breeze!.
· PURIFIED H2O
Distillation is the One water treatment Technology that most
completely reduces the widest range of drinking water contaminats,
including biological, organic and inorganic elements , Bacteria & virus .
The process , in fact provides water that is 99% free of impurities.
* CONSISTENT QUALITY
* NO CHEMICAL
* LOWER COST THAN BOTTLED WATER
* USE ANY WATER SOURCE EVEN
( SEA WATER )
* NO POLLUTANTS
* NO MICROORGANISMS
* NO DISSOLVE MINERALS
* ECONOMICAL
* LOW MAINTENANCE
* AUTOMATIC REFILL
* AUTOMATIC SHUT-OFF
* ALL STAINLESS STEEL MADE.
| 
